®
SELECT
DAIRY BARN
Self-Cleaning Electric Water Heater
This 80-gallon electric water heater is equipped with two heating elements, with thermostats that are adjustable
up to 180ºF, to provide sanitizing hot water required in a dairy barn environment. It is also shipped with a base
with 4" legs, to raise the water heater off the floor to simplify and maintain sanitary conditions.
Self-Cleaning Turbo Coil Dip Tube
• Designed with jet ports that direct incoming cold water
to create turbulence and reduce sediment buildup in
the tank
• Reduced sediment buildup helps prolong tank life
and maximizes high energy-efficiency
• Made from State PEXAN™, a cross-linked polymer that can withstand
long-term exposure to temperatures up to 400ºF
Two 4500-Watt Heating Elements, Each with
180ºF Thermostat
• Elements are available non-simultaneous or simultaneous with off-peak
metering as demanded by zone requirements
• 180ºF thermostat allows hot water sanitization
Glass-Lined Tank with Two Anode Rods
• Provides maximum protection against corrosion
2" Thick (R-16) Foam Insulation for High Energy-Efficiency
Durable Brass Tamper-Resistant Drain Valve
Factory-Installed Temperature and Pressure (T&P)
Relief Valve
Certified to UL 174 for Electric Water Heaters
• Additional code compliance: CEC, CABO, HUD, BOCA National
Codes, ASHRAE/IES 90.1-1999 and 2004 NAECA
3-Year Limited Tank Warranty, 1-Year Limited
Parts Warranty
• Consult written warranty or contact State Water Heaters for
complete information
FPoHr AOddNitEion8al0Te0ch-n3ic6al5In-f0or0m2at4ion,
STATE WATER HEATERS
500 Tennessee Waltz Parkway, Ashland City, TN 37015
Page 1 of 2
SRESS00406
®
SELECT
DAIRY BARN
Self-Cleaning Electric Water Heater
STANDARD RECOVERY
DIMENSIONS IN INCHES
FIRST HOUR
RATING
(GALLONS)
APPROX.
MODEL
NUMBER
GALLON
ELEMENT 90°F RISE
R
.
SHIPPING
WEIGHT
CAPACITY WATTAGE* GALLONS
VALUE
A
B
C
240 VAC
PER HOUR
PE 82 20DT
86
80
4500
21
16
67-1/2
60
24
210
Inlet and outlet connections: 3/4"
Single-element models not available on dairy barn models.
This model uses 1" screw-in elements.
*Maximum element wattage 6000 watts
ANODE
ROD
HOT
CONNECTION
COLD
CONNECTION
8"
C
A
B
4"
State Industries, Inc. reserves the right to make product changes or improvements without prior notice.
FPoHr AOddNitEion8al0Te0ch-n3ic6al5In-f0or0m2at4ion,
STATE WATER HEATERS
500 Tennessee Waltz Parkway, Ashland City, TN 37015
Page 2 of 2
SRESS00406
SWHM-112060-2.5M-MSI-0306
©2006 State Industries, Inc.
Printed in U.S.A.
|