Instruction Manual
6 ft. USB to DB25 Parallel Printer Adapter Cable
ICUSB1284D25
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
*actual product may vary from photos
Packaging Contents
Setting Up a Printer Device
• 1 x USB to Parallel Printer Cable
• 1 x Driver CD
1. Turn off your printer. Plug the DB25 connector of the USB to
Parallel Printer cable into your printer or printer cable.
2. Turn your printer and computer on.
• 1 x Instruction Manual
3. Plug the USB connector of the cable into the USB port of your
computer.
4. If you have already installed a printer device before click“Start”,
“Settings”,“Printers”. Right-click the default installed printer and
click on“Properties”. The properties dialog box of the installed
printer will appear on your screen.
5. Click the details folder tab and change the printer port to
LPT2:USB to Parallel Port (Win98SE) or USB001 (WinXP *Note that
there may be other USB00x ports, so you may need to try each
one).
6. If you do not have a printer installed yet, click“Start”,“Settings”,
“Printers”,“Add Printer”. The Add Printer Wizard will start and
assist you in installing a new printer device. Select the printer
manufacturer and model name from the list provided by the
wizard or use the driver disk supplied with your printer.
7. When prompted which port the printer will use, click on LPT2:USB
to Parallel Port (Win98SE) or USB001 (WinXP *Note that there may
be other USB00x ports, so you may need to try each one).
System Requirements
• Intel-compatible 486DX-66 MHz CPU or higher with an available
USB port
• Microsoft® Windows® 98SE/ME/2000/XP/Vista/7 (32/64-bit)
• CD/DVD-ROM drive (Win98SE installation only)
Installation
Please note: Installation on a computer that is running
Windows 2000 or later is automated. If you are using a prior
release, such as Windows 98SE, the included driver CD
contains the files needed for successful installation.
Windows 98SE
1. Insert the Driver CD into the CD/DVD-ROM drive.
2. Connect the USB to Parallel Printer cable into an available USB
port. Do not have the printer connected to the cable yet.
3. Windows will detect the adapter and prompt for drivers.
4. Select the“USB IEEE-1284 Bridge”folder on the CD as the location
to search.
Specifications
Bus Interface
USB 1.x
5. Windows will automatically install the drivers from the CD.
1 x USB type A male
1 x 25-pin D-Sub (DB25) female
Connectors
Maximum Data Transfer Rate
Power Adapter
1.5Mbps
USB powered
Windows 2000/XP/Vista
1. Connect the USB to Parallel Printer cable into an available USB
port. Do not have the printer connected to the cable yet.
2. Windows will detect that the cable has been connected, and
install the necessary software automatically.
Operating Temperature
Storage Temperature
Humidity
5°C ~ 40°C (41°F ~140°F)
-20°C ~ 70°C (-4°F ~ 158°F)
0% ~ 80% RH
Cable Length
1.8m / 6ft
Windows® 98SE/ME/2000/XP/
Vista/7 (32/64-bit)
Operating System Support
Manual Revision: 10/21/2011
|