Manual
Vox Ranger
RackPack Module, Model 2718
Graphic Equalizer For The Vocal Range
Content
Important Safety Information .....................................
Hook Up .............................................................
Scope Of Delivery ...................................................
Introduction .........................................................
4
6
6
7
Rear Panel/Connections ...........................................
Wiring .............................................................
XLR Sockets, Lundahl I/O Transformers, Channel Split ........
8
8
9
Control Elements ................................................... 10
On, LED Display .................................................. 10
OUTPUT, Fader .................................................... 11
The Eight EQ Bands ............................................... 12
Diagram of Filter Curves ......................................... 13
EQ Table ........................................................... 14
Operation ............................................................ 16
EQ Principles ..................................................... 16
Technology .......................................................... 17
Bell Filters, Passive Filters, Advantages of Passive Filters ..... 17
Specifications ....................................................... 18
Option/Information on Lundahl Transformers ..................... 19
Copy Master: Recall Settings ....................................... 20
Guarantee ............................................................ 21
RackPack: Vox Ranger
3
Important Security Information
Please note and retain this information. Carefully read and follow all
of the safety and operating instructions before you use the machine.
Be doubly careful to follow all warnings and special safety instructions
noted in this manual and on the unit. The following information refers
to modules built into the RackPack frame.
Connections: Only use the connections as described. Other connec-
tions can lead to health risks and equipment damage.
Water And Humidity: Do NOT use this machine anywhere near water
(for example near a wash basin or bath, in a damp cellar, near swim-
ming pools, or the like). In such cases there is an extremely high risk of
fatal electrical shocks!
Insertion Of Foreign Objects Or Fluids: NEVER allow a foreign object
through any of the machine‘s chassis openings. You can easily come
into contact with dangerous voltage or cause a damaging short circuit.
NEVER allow any fluids to be spilled or sprayed on the machine. Such
actions can lead to dangerous electrical shocks or fire!
OPENING THE DEVICE: Open the device only to fit or exchange mod-
ules. The fitting and/or exchange of modules should only be carried
out by qualified persons. In the light of possible physical damage
or injuries any manipulation is at your own risk. In order to avoid
any residual voltage, the device should be disconnected from any
power source at least 5 minutes prior to opening it. If you handle the
device improperly or ignore the manual (part of the delivery of the
RackPack frame) you risk to damage the device or expose yourself
to an electric shock. In these cases SPL electronics GmbH denies any
responsibility.
Electrical Power: Run this machine ONLY from sources which can
provide proper power at the prescribed rating. When in doubt about
a source, contact your dealer or a professional electrician. To be sure
you have isolated the machine, do so by disconnecting the power cord
from your wall connection. Be sure that the power cord plug is always
accessible. When not using the machine for a longer period, make sure
to unplug it from your wall power socket.
Power Cord Protection: Make sure that your power cord is arranged to
avoid being stepped on or any kind of crimping and damage related
to such event. Do not allow any equipment or furniture to crimp this
power cord.
Power Connection Overloads: Avoid any kind of overload in connec-
tions to wall sockets, extension or splitter power cords. Always keep
manufacturer warnings and instructions in mind. Overloads create fire
hazards and risk of dangerous shocks!
4
RackPack: Vox Ranger
Important Security Information
Lightning: Before thunderstorms or other severe weather, disconnect
the machine from wall power (but to avoid life threatening lightning
strikes, not during a storm). Similarly, before any severe weather, dis-
connect ALL the power connections of other machines and antenna and
phone/internet cables which may be interconnected so that no light-
ning damage or overload results from such secondary connections.
Air Circulation: Chassis openings offer ventilation and serve to pro-
tect the machine from overheating. NEVER cover or otherwise close
off these openings. NEVER place the machine on a soft surface (car-
pet, sofa, etc.). Make sure to provide for a mounting space of 4-5 cm/2
inches when mounting the machine in racks or cabinets.
Controls And Switches: Operate the controls and switches only as
described in the manual. Incorrect adjustments outside safe para-
meters can lead to damage and unnecessary repair costs. Never use
the switches or level controls to effect excessive or extreme changes.
Repairs: Unplug the machine and immediately contact a qualified
technician when you think repairs are needed – or when moisture or
foreign objects may accidentally have gotten in to the housing, or in
cases when the machine may have fallen and shows any sign of having
been damaged. This also applies to any situation in which the machine
has not been subjected to any of these unusual circumstances but
still is not functioning normally or its performance is substantially
altered.
In cases of damage to the power cord or its plug, first consider turning
off the main circuit breaker before unplugging the power cord.
Replacement/Substitute Parts: Be sure that any service technician
uses original replacement parts or those with identical specifications
as the originals. Incorrectly substituted parts can lead to fire, electri-
cal shock, or other dangers, including further equipment damage.
Safety Inspection: Be sure always to ask a service technician to con-
duct a thorough safety check and ensure that the state of the repaired
machine is in all respects up to factory standards.
Cleaning: In cleaning, do NOT use any solvents, as these can damage
the chassis finish. Use a clean, dry cloth (if necessary, with an acid-
free cleaning oil). Disconnect the machine from your power source
before cleaning.
RackPack: Vox Ranger
5
Hook Up
Fitting A Module
The fitting and/or exchange of modules should only be carried out by
qualified persons. Please read the manual of the RackPack frame. It
contains all information needed to fit a module as well as all safety
and notes and warnings. If you don‘t have the manual at hand, you can
download it like all SPL product manuals from our website.
Symbols And Notes
IN THIS MANUAL A LIGHTNING SYMBOL WITHIN A TRIANGLE WARNS
YOU ABOUT THE POTENTIAL FOR DANGEROUS ELECTRICAL SHOCKS
– WHICH CAN ALSO OCCUR EVEN AFTER THE MACHINE HAS BEEN
DISCONNECTED FROM A POWER SOURCE.
AN EXCLAMATION MARK (!) WITHIN A TRIANGLE IS INTENDED TO MAKE
YOU AWARE OF IMPORTANT OPERATIONAL ADVICE AND/OR WARNINGS
THAT MUST BE FOLLOWED. BE ESPECIALLY ATTENTIVE TO THESE AND
ALWAYS FOLLOW THE ADVICE THEY GIVE.
The symbol of a lamp directs your attention to explanations of impor-
tant functions or applications.
Attention
Do not attempt any alterations to this machine without the approval
or supervision of SPL electronics GmbH. Doing so could nullify com-
pletely any and all of your warranty/guarantee rights and claims to
user support.
Scope Of Delivery
• The module
• This manual
• Two Philips screws to mount the module to the back panel (if mo-
dule is delivered separately from the frame). Further screws needed
for mounting the module remain when you remove front and rear
covers from the RackPack frame.
6
RackPack: Vox Ranger
Introduction
The Vox Ranger EQ Module is a graphic equalizer for the vocal range
with passive coil filters in eight bands. It employs bell filters, each with
individually optimized bandwidths, boost and cut values.
The concept of the Ranger EQs for the RackPack modular system is
characterized by two decisive features that separate them from tradi-
tional designs. First there is the basic idea of specialized modules for
typical instrument or vocal ranges. This follows a consistently musi-
cal approach, but also the design of each filter is based upon musical
demands alone—center frequency selection is not governed by techni-
cal ISO rules, but relies on our own experiences and the preferences of
well-known colleagues.
In contrast to statical graphic EQs with always the same center fre-
quencies in repeating octave distances, the Ranger EQ modules are
much better suited to work with specific instruments and their pecu-
liarities—and only different frequency ranges do allow to effectively
separate instruments in a mix.
The second characterizing feature follows the idea of a modular design
and affects both the filter technology and the user interface. Why did
we chose a graphic EQ design? For a fully parametric EQ with all neces-
sary controls there would be space for one band on the module front.
Our graphic EQ offers eight bands—a bandwidth control is less impor-
tant, and different EQ modules can be combined to configure a large
and, if needed, complex EQ system.
But a traditional graphic EQ with an active filter design did not seem to
match our idea of a holistically musical approach. We decided for a rare
technical solution: the combination of passive filters with a graphical
user interface. Based upon individually specified, custom-made coils,
these filter designs convince with outstanding musical qualities.
Finally, the general advantage of modular systems becomes clearly
obvious when planning individual systems: A vocal recording channel
with RackPack modules can be configured in very specific ways, while
a complex EQ system may have a completely different focus.
RackPack: Vox Ranger
7
Rear Panel/Connections
Wiring
.JYFS
*OTFSUꢀ4FOE
PS
$POWFSUFS
0VUQVU
ꢀ
.JYFS
*OTꢁꢀ3FUVSO
PS
$POWFSUFS
*OQVU
ꢀ
ꢀ
$IBOOFM
4QMJU
3BDL1BDL
8
RackPack: Vox Ranger
Rear Panel/Connections
XLR Sockets, Transformers, Channel Split
The Vox Ranger is fitted with one XLR input and two XLR outputs for
balanced operation.
Pin-wiring of all XLR sockets:
Pin 1 = GND, Pin 2 = hot (+), Pin 3 = cold (-)
Discrete balancing stages for both in- and output provide high common
mode rejection and are capable of driving long cables (depending on
the capacity of the cables and the following input balancing stages).
The illustration shows the correct pin-wiring of the balanced XLR sock-
ets if an unbalanced wiring is required.
Lundahl I/O Transformers
The Input and Output 1 stages may be transformer-balanced if ordered
(please refer to page 20 for detailed information). Otherwise, all
inputs and outputs are balanced electronically. Output 2 cannot be fit-
ted with a transformer. It is actively decoupled and allows for the input
signal to be split into two output signals.
*OQVU
0VUQVU
CBMBODFE
VOCBMBODFE
CBMBODFE
VOCBMBODFE
ꢂ
ꢀ
ꢂ
ꢂ
ꢂ
ꢀ
ꢀ
ꢀ
ꢆ
ꢆ
ꢆ
ꢆ
ꢀꢁ(/%
ꢂꢁIPUꢃ ꢄꢅ
ꢆꢁDPMEꢃ ꢇꢅ
Channel Split
The channel split option through Output 2 always provides alterna-
tives in processing or routing of the input channel. While one output
may be used directly for mixing, the second output can be routed in
any other way—for example to further RackPack modules, to other
effect units etc.
RackPack: Vox Ranger
9
Control Elements
ON, LED Display
ON
With the ON button you can turn the device on or off. The ON button is
illuminated when the device is active.
Relay hard bypass circuits ensure signals to be directly switched from
input to output in the case power failures – this “Power Fail Safety“
feature guarantees signal flow in any situation.
Signal LED
The SIG. LED indicates that an audio signal reaches the input with a
level above -20dB. This LED helps the operator especially in complex
setups to determine immediately whether the Vox Ranger actually
receives any signal.
Overload LED
The OVL LED indicates a potential internal overload. It begins indicat-
ing approximately 3dB ahead of any expected overload to leave head-
room for peak levels.
Overloads must be avoided to exclude audible distortions. The gaining
is still perfect in most cases when the OVL LED is illuminating shortly
since there’s still a headroom of 3dB for peak levels.
Permanent illumination of the OVL LED indicates overloads with pos-
sible audible distortions. Reduce the OUTPUT Gain control if the OVL
LED illuminates permanently until the OVL LED goes out or flashes
shortly.
10
RackPack: Vox Ranger
Control Elements
OUTPUT, Fader
OUTPUT Stage
With the OUTPUT control you can readjust levels that were changed by
previous EQ settings.
For example, if you have by and large applied cut values to the signal,
the overall output level can be lifted again to meet the input level’s
value.
The same of course applies vice versa: simply lower the output to com-
pensate for boosts that may result from your processing.
If source and receiving units do not display levels, rely on setting the
output by ear. An A/B comparison can be made with the ON switch.
Please note that differences in sound, resulting from EQ processing,
should not influence your loudness judgement when setting the out-
put level by ear.
Fader
The Vox Ranger module offers nine fader controls. The upper eight fad-
ers control the eight frequency bands, the lowest fader controls the
output stage. All faders are manufactured by Bourns and show high-
grade quality specifications. Their handling is featuring a perfect bal-
ance between smoothness and resistance.
All center positions are detented and all faders are illuminated to
ensure safe operation also in dark environments.
RackPack: Vox Ranger
11
Control Elements
The Eight EQ Bands
Each filter is designed as bell filter with individually optimized band-
widths and boost/cut values. Each filter is regulated by a fader con-
trol. The frequency range around the center frequency can be boosted
(fader to the right into direction “+”) or can be cut (fader to the left into
direction “-”) directly.
Here is a short list with examples for setting each band. This list is of
course not complete or demands general validity—we just want to give
some suggestions and orientation to start from.
Band 1: 4kHz Center Frequency
Boost: improves intelligibility for vocals (chant).
Cut: reduces risk of feedback (live).
Band 2: 2.8 Hz Center Frequency
Boost:
improved intelligibility for voices (speech).
Cut: masks wrong intonation, more air in backings.
gets
vocals
up
front,
intensifies
presence,
Band 3: 1,6kHz/Band 4: 800Hz/Band 5: 560Hz/Band 6: 420Hz
The main vocal area from about 500 to 2000 Hertz is covered from
these four bands. Particular fundamentals can be processed here.
Band 3 reaches up into the presence area, Band 6 processes the
foundation.
Band 7: 330 Hz Center Frequency
Boost: more warmth, fuller sound (pay attention to larger dis-
tances to the microphone).
Cut can bring more clarity.
Band 8: 220 Hz Center Frequency
Boost: “Belly“ of singing voices.
Cut can reduce pulpy sounds/improves clarity
.
12
RackPack: Vox Ranger
Control Elements
Diagram Of Filter Curves
RackPack: Vox Ranger
13
EQ Table
Instrument Frequency up to +/- Effect
All
0
35
-
cut sub harmonics
All
All
All
All
All
All
All
All
50
50
+
-
+
fuller sound deep instruments
reduces boomy sounds of d. instruments
harder bass deep instruments
100
150
500
1700
8000
12000
50
250 +/- warmth, reduces pulpy sound of d. instr.
1,7K
8K
20K
20K
60
+
bass definition, phone sound, presence
+/- sharp sounds, intelligibility, attacks
+
-
more air, transparency, brighter, hi-fi
red. noise/hiss, digital “S“ sounds
improves assertion, room for kick drum
fuller sounds
Bass
Bass
Bass
Bass
Bass
Bass
Bass
Kick Drum 35
Kick Drum 60
Kick Drum 80
Kick Drum 90
Kick Drum 250
Kick Drum 300
Kick Drum 350
Kick Drum 2K
-
60
75
350
500
600
2000
80
+
150 +/- main impact of bass instruments
400
800
1,2K
3K
75
80
100
100
400
500
400
4K
+
+
+
+
+
+
-
+
-
+
-
accentuates bass lines
more clarity
bass tone/material sound (wood)
improves attack, metal strings, slap
deep bass punch, supports kick drum
more punch
makes room for bass
punch, assertion on small monitors
reduces wooden and pulpy sounds
accentuates, cripsy
reduces cardboard sound
+/- emphasizes/reduces drumhead kick
Snare
Snare
Snare
Snare
Snare
Snare
Snare
Toms
Toms
Toms
Toms
Toms
Toms
140
200
300
200
3K
5K
8K
80
80
240
400
300
3K
260
400
500
2K
+
+
-
+
+
+
+
+
-
+
-
-
+
+
-
snares sound fuller, rounder
more punch
softens snares
resonance frequencies
more attacks
emphasizes typical snare sounds
punch
emphasizes tone of floor toms
reduces sustain of floor toms
more belly
reduces hollow sounds
softer sounds
more attack for deep toms
more attack
reduces gong sound
reduces metal in a hi hat
more glitter on ride cymbals
reduces harshness
6K
12K
120
110
400
500
6K
Toms/Perk 7K
Cymbals
Cymbals
Cymbals
Cymbals
200
800
6K
1K
8K
11K
-
+
-
10K
14
RackPack: Vox Ranger
EQ Table
x
Vocals
0
150
140
300
-
+
-
-
+
-
avoids collision with bass and kick
fills deep vocals
slenderizes spoken voices
reduces pulp in vocals
belly of vocals
Vocals
Vocals
Vocals
Vocals
Vocals
Vocals
Vocals
Vocals
Vocals
Vocals
Vocals
Vocals
Vocals
Vocals
Vocals
Vocals
Guitar
100
180
200
200
200
300
600
1,8K
3K
3K
3K
4K
4K
350
400
400
clarity
+
more warmth, full-bodied
+/- foundation
4K
4K
4K
+
+
-
-
+
-
presence; vocals up front
lead vocals up front/more clarity
more air in backings
masks wrong intonation
singing voices: more intelligibility
feedback-sensitive range (live)
reduces sibilants
brightens vocals; presence
more brilliance, air
6K
6K
11K
10K
7K
8K
12K
80
-
+
+
+
-
120
fuller basses with acoustic guitars
less boom, more clarity
GTR/Keyb. 100
Guitar
Guitar
GTR/Keyb. 250
GTR/Keyb. 300
Guitar
GTR/Keyb. 1,2K
GTR/Keyb. 2K
100
180
200
280
500
400
1K
-
+
-
+
-
-
resonances (106Hz, 212Hz) of ac. guitars
makes guitars fuller, more fat
less pulp
more warmth
reduces cheap sound of e-guitars
reduces dullness, metal; room for vocals
800
2K
3K
+/- more/less aggressive; overexposure
Guitar
Guitar
Guitar
Guitar
Guitar
Piano
Piano
Piano
Piano
Piano
3K
3K
5K
5K
10K
80
2,5K
3K
5K
10K
5K
+
-
+
-
+
+
+
+
+
+
+
+
-
more attack for e- and ac. guitars
masks badly tuned guitars
brightens up e- and ac. guitars
softens thin guitars
brightens up guitars
saturated depth
(narrow band) boost: Honky Tonk sound
more attack for lower tones
more attack for normal tones
brightens up
more warmth and belly
fuller sound
reduces metal
places instruments up front
reduces sharpness
12K
160
Piano/Bläs. 100
300
300
1,5K
8k
8K
300
Brass
Brass
Brass
Brass
Strings
Strings
100
700
4K
4K
200
7K
+
-
+
fuller strings
11K +/- emphasizes/reduces brilliance
RackPack: Vox Ranger
15
Operation
EQ Principles
First cut, then boost: The hearing system is more used to energy
reductions in a frequency range, thus boosts attract more attention.
That is, a 6 dB boost is perceived to be similar in amount to a 9 dB
cut. Therefore when wishing to emphasize one frequency, it is typi-
cally better first to consider a reduction in others. The result will bring
more transparency and clarity as well as reduce possible unwanted
coloration of the signal.
Boost harmonics: Harmonic enhancement is one of the foremost tech-
niques for increasing the clarity and definition of an instrument. One
overtone area for vocals is around 5kHz and accentuates presence.
Note that each instrument will have at least two frequencies where EQ
can achieve a greater clarity or brilliance.
Cutting fundamental levels: Cutting fundamental frequencies pro-
vides for a perceived increase in harmonics and is therefore an effec-
tive alternative to boosting harmonic levels. This is a common practice
in Rock/Pop productions that can be effective in all musical recording
genre.
Boosting fundamental levels: Inexperienced audio engineers will
often first try to make corrections by boosting fundamentals, some-
thing which in fact should be the last thing one considers. Boosting
fundamentals typically lowers clarity and produces a muddy sound.
If two instruments are playing the same part and thereby produce the
same fundamental, raising these levels will lead to a decrease in the
sonic difference between them, (i.e., will make the two instruments
sound more alike and lower their intelligibility in the mix). This is also
true when two instruments play similar parts in the same key.
Exception: When an instrument sounds thin or small, boosting the
fundamental can help. Or perhaps a microphone was poorly placed
or the harmonics had been raised excessively through EQ. Finally,
increasing fundamental levels can also play a constructive role when
instruments play alone or as soloists with others in the background.
16
RackPack: Vox Ranger
Technology
Bell Filters, Passive Filters, Advantages of Passive Filters
Bell Filters
A bell filter boosts or cuts a chosen frequency‘s energy with a maxi-
mum amplitude and a definable frequency range around this fre-
quency with a fall off of up to 3dB to both sides. The chosen frequency
with the maximum amplitude is called center frequency—it takes
place in the middle at the peak of the response curve. The response
curve forms a bell, but bell filters are also often referred to as peak
filters (also refer to page 13, “Diagram Of Filter Curves”).
Passive Filters
The filters in a passive network employ no intrinsic amplification ele-
ments and therefore need no external power, which means in effect
that they can really only cut the energy of a chosen frequency. In order
to expand this capability to include boosting the energy of a band-
width (that is, to be able to boost and cut frequencies), the overall fil-
ter input signal level is reduced. Based on this overall reduction and
relative to the original input signal, one can achieve a further cut or
boost in the form of a return to that original signal level. Thus a pas-
sive filter is always followed by an amplifier which is responsible to
regain the initial energy reduction.
Advantages of Passive Filters
• Typically coil inductance in virtually all active filters is achieved
through simulation. True passive coil filters, on the contrary, can
only deliver the genuine, characteristic sound associated with
inductive components.
• Inherent distortion elements of active filters are ruled out by pas-
sive filter design.
• For any number of reasons stemming from design and component
advantages over active filters, passive filters achieve a very natural
aural quality and through their harmonic treatment (THD, distor-
tion, phase response, etc.), offering at the very least, a clear sonic
alternative—in our ears often an extremely attractive one.
• All passive filter components (variable resistor, capacitor and coil)
work in concert to produce this beautiful sonic result. An important
part of this process is played by coil and condenser loading and
saturation characteristics. The resulting difference in latency from
characteristically extremely fast reaction of active filters provides
for more pleasant, musical sonic qualities. We tend to perceive
these attributes in terms of an increased suppleness and transpar-
ency, with perceptibly improved, silky highs and robust basses.
RackPack: Vox Ranger
17
Specifications
Audio
Frequency Range:
CMR@ 1kHz:
10Hz-30.000Hz
-85dBu @ 100Hz, -80dBu @1kHz
0,03% @ 0dBu/0,01% @ +10dBu
-83dBu
THD @ 1kHz:
Noise, A-weighted:
Dynamic Range:
›107dB
Fast Fourier Transformation (FFT): ›-85dBu (@ 1kHz)
Input
XLR connection, electronically balanced
(optionally transformer-balanced)
Impedance:
balanced ›20kOhm/unbal. ›10kOhm
+22dBu
Max. Input Level:
Outputs
Output 1: XLR connection, electronically balanced
(optionally transformer-balanced)
Impedance (‹600 Ohm):
Max. Output Level:
bal. ca. 150 Ohm/unbal. ca. 75 Ohm
+22dBu
Output 2: XLR connection, electronically balanced
Impedance (‹600 Ohm):
Max. Output Level:
bal. ca. 150 Ohm/unbal. ca. 75 Ohm
+22dBu
Control Elements
Signal LED (SIG.):
Overload LED (OVL):
-20dBu
+21dBu
Dimensions & Weight
Height x Width x Depth
132 x 46,9 x 315mm
ca. 5,2x1,85x12,4 in
Weight
0,45kg/0,99lbs
0,65kg/1,43 lbs
Weight w. Transformers
0dBu = 0,775V. Specifications subject to change without notice.
18
RackPack: Vox Ranger
Copy Master: Recall Settings
Artist:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Album:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Title:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engineer:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Track(s)/Group(s):
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Date:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RackPack: Vox Ranger
19
Option
Lundahl Transformers
As an option, the DynaMaxx RackPack module can be fitted with input
and output transformers from Lundahl. The transformer options can
only be ordered by purchase, a later upgrade is not possible.
Information On Lundahl I/O Transformers
Transformers have a pleasant sound characteristic, especially the low
end sounds rounder and more full-bodied. The top end benefits from a
softer and silky atmosphere without being emphasized.
Further advantages are aspects of improved operational safety: gal-
vanic insulation excludes the transmission of damaging currents.
Electromagnetic, high frequency or digital interferences have no influ-
ence on the signal quality, hum potentials are cancelled out.
From our listening experience we can recommend Lundahl I/O trans-
formers in any case, and their improved operational safety is an advan-
tage that can not be overestimated in any critical or complex studio,
broadcast or sound reinforcement installation.
Guarantee
All SPL products come with a two-year manufacturer’s guarantee
against defects in material or assembly from the date of factory deliv-
ery. Tubes have a guarantee period of 3 months.
End users are supported in the two-year guarantee through their dis-
tributor or dealer. In such cases, please contact your dealer for full
guarantee conditions and service.
Direct SPL product support requires product registration. Please fill
out the guarantee card enclosed in the package legibly in printed let-
ters and send it directly to SPL. Or use the online registration form
20
RackPack: Vox Ranger
|